FOREX - MP2009新的方式 - 鱼饵

yast77

原帖由 SingHooi 于 30-11-2008 01:38 PM 发表

The EA should have
Lot,SL,TP,TP,Trend_MTF_1,Trend_MTF2,Trend_MTF_3.

3 Trend_MTF is more sucure than 2 Trend_MTF like post 1248, but the user can set 2 trend_mtf only.

When SL and TP set ...

I'm writing it already, but i have something need to be clear is, user can set 2 trend_mtf only right ? Then the condition should use 2 or 3 trend_mtf ?

SingHooi

原帖由 yast77 于 30-11-2008 02:30 PM 发表 I'm writing it already, but i have something need to be clear is, user can set 2 trend_mtf only right ? Then the condition should use 2 or 3 trend_mtf ?

Yes, Minimun 2 , Max 3

callmedante

原帖由 SingHooi 于 30-11-2008 01:54 PM 发表
If you are not confident enough to Enter the market, so please wait for the indicator form the last line at :
For M1 system, the entry time at
6,11,16,21,26,31,36,41,46,51,55,01 min

eg Open Posit ...

請問這是為什麼呢?為何在這些時間入場會比較安全?

很感謝你將各種時間段的配置都寫了出來
如果方便的話，可否請教一下你在各個時間段是如何設置S/L和T/P的嗎?
M5、M30和T1中，那個時間段是你最常使用的呢?

SingHooi

M5 is my best system .. 
The M1 to D1 system depends on the user, if you 24 hours facing the PC, then M1/M5 is good for you, but if you have your own job 9 to 5 , then H1/D1 is suitable. 

About the TP/SL, depends how greedy and what risk you want to trade and the Lot you bet ... if your OP 0.01 lot, then you may wait for 50pips, On the other hand, your OP 1 lot, 10 pips is more than enough ... don't risk you capital more than 5%... eg if your account balance $200, 5% =$10 ..so your plan of TP will base on your lot*pips, eg ...0.02*50 or 0.2*5pips , of  course each pair have their save SL/TP, like GJ up and down 50 pips to 100 pips per/session, so don't put SL at 20 pips if you trade on GJ.


But don't put your SL/TP too low, the market up and down will eat up your SL ... standard and save SL may on 20 to 30 ...On the other hand , if you are using H1 to D1 system, the SL will be 100 to 150pips and TP 200 to 300 pips ...The decision on you and please calculate the RISK ( 5% ) .

[ 本帖最后由 SingHooi 于 30-11-2008 02:48 PM 编辑 ]

small_dragon

多谢singhooi兄的分享...
我是个菜鸟...
我想问singhooi兄,如果用M5 system,那么就要用trend_MTF15和30...
那么为什么不需要加入trend_MTF5呢??

谢谢singhooi兄的指导...

SingHooi

原帖由 small_dragon 于 30-11-2008 03:18 PM 发表 多谢singhooi兄的分享...我是个菜鸟...我想问singhooi兄,如果用M5 system,那么就要用trend_MTF15和30...那么为什么不需要加入trend_MTF5呢??谢谢singhooi兄的指导...

 
The question same when you use M1 system, why not using Trendy_MTF M1 ?

So to avoid from wrong and bias signal .. we should use higher tf indicator as support.

 Just have a test, try to use TF M5 with Trendy_MTF 5 + Trendy_MTF 15 & Trendy_MTF 30 .. and entry base on Trendy_MTF 5, see what's the different compare to the original sytem the entry base on Trendy_MTF 15 ? 

of course, when you use trendy_MTF 5 will make you confuse ... too many signals ..

Just have a try ..if you feel 3 Trendy_MTF if good then apply it .This system are flexible .. if you not sure, then use the original concept .. if you are more advance .. try to modify, plug and play around .. 

[ 本帖最后由 SingHooi 于 30-11-2008 03:33 PM 编辑 ]

small_dragon

谢谢singhooi兄的指导...

yast77

SingHooi兄，你有WPR Indicator吗？Trendy Indicator有用到它。

SingHooi

原帖由 yast77 于 30-11-2008 04:13 PM 发表 SingHooi兄，你有WPR Indicator吗？Trendy Indicator有用到它。

WPR = William' Percentage Range is a standard indicator for Meaquotes, you should find it at "Indicator" section . All the 18 indicators are standard Metaquotes indicators .. no problem !

yast77

原帖由 SingHooi 于 30-11-2008 04:16 PM 发表

WPR = William' Percentage Range is a standard indicator for Meaquotes, you should find it at "Indicator" section . All the 18 indicators are standard Metaquotes indicators .. no problem !

I know this is the indicator from the metatrader, but i check back the code for Trendy.Mq4, it use custom indicator named WPR, so i'm thinking if the WPR is modified version, so the value will be different, what do you think ? Else i will change the code in trendy to get no error when testing the EA...

SingHooi

原帖由 yast77 于 30-11-2008 04:23 PM 发表 I know this is the indicator from the metatrader, but i check back the code for Trendy.Mq4, it use custom indicator named WPR, so i'm thinking if the WPR is modified version, so the value will be di ...

 
You should use the standard version, because when i started using this system ... only download the trendy file only, no other files attached !

[ 本帖最后由 SingHooi 于 30-11-2008 04:27 PM 编辑 ]

gfish213

SingHooi兄，download的网页好像不能下载了～～～～
可以在uplaod吗？？

yast77

I found a problem when visual testing, izzit the trendy_MTF only update the signal for it's period, i mean if the value is 60, mean it update every 60 minute right ?

SingHooi

原帖由 yast77 于 30-11-2008 04:49 PM 发表 I found a problem when visual testing, izzit the trendy_MTF only update the signal for it's period, i mean if the value is 60, mean it update every 60 minute right ?

No, if the chart in M5, it will update every 5 min same row with the tick.

SingHooi

原帖由 gfish213 于 30-11-2008 04:33 PM 发表 SingHooi兄，download的网页好像不能下载了～～～～可以在uplaod吗？？

"http://rapidshare.com/files/168790680/trendysystem.zip.html"

SingHooi

原帖由 yast77 于 30-11-2008 04:49 PM 发表 I found a problem when visual testing, izzit the trendy_MTF only update the signal for it's period, i mean if the value is 60, mean it update every 60 minute right ?

The full code in "Trendy" and Trendy_MTF just call the full code from Trendy with setting the TF. i think this may help you ! 

Are you using the Trendy or Trendy_Alert ? In the Trendy_Alert with this code{   double g;   int m,s,k;   m=Time[0]+Period()*60-TimeCurrent();   g=m/60.0;   s=m%60;   m=(m-m%60)/60;   return(m);}

 Is it cause the problem ?

Then you should use "Trendy"

[ 本帖最后由 SingHooi 于 30-11-2008 05:07 PM 编辑 ]

gfish213

原帖由 SingHooi 于 30-11-2008 04:57 PM 发表

"http://rapidshare.com/files/168790680/trendysystem.zip.html"

谢谢您～～～～在研究着～～～

yast77

我找到Trendy System的由来了，http://www.forexfactory.com/showthread.php?t=86332。
我已经写好这EA了，但是这需要再改，因为MTF的关系，它OP会Delay，
Example：
如果用两个Indicator，它需要Higher TF来Comfirm Signal，但是Higher TF 好像H1，它只会在每小时Update Value一次。
可以在以下网址下载。
http://www.sendspace.com/file/nminva
还需要大家的Comment来改进。

yast77

原帖由 SingHooi 于 30-11-2008 04:59 PM 发表

The full code in "Trendy" and Trendy_MTF just call the full code from Trendy with setting the TF. i think this may help you !

Are you using the Trendy or Trendy_Alert ? In the Trendy_A ...

I used Trendy_MTF, i tested already, both give me the same result.

esj_joo

请问trendy, trendy Alert 和 trendy MTF 这三个indicator有什么不同之处？