来讨论看看到底为什么烧录失败??

1234_4321

我下载了一个video600+MB,当我要burn成VCD format时,nero帮我算出如果要burn成vcd,转换成mpeg需要800+MB,而一片CD也只有700MB....


我懒惰把它split成2片来burn,结果我就买了一片拥有870MB/99min 的VCD,可是burn后却失败,请问是什么原因??在nero里我已设定overburning成99了....(如下图)




请问还有什么原因导致我烧录失败吗???
楼下是nero烧录失败后给我的log...

[ 本帖最后由 1234_4321 于 6-11-2006 06:55 PM 编辑 ]

1234_4321

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder:             <GIGABYTE GO-R5232C>      Version: 48S2 - HA 1 TA 0 - 6.6.0.8
Adapter driver:      <atapi>                   HA 1
Drive buffer  :      2048kB
Bus Type      :      via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM:               <GIGABYTE GO-R5232C       >Version: 48S2 - HA 1 TA 0 - 6.6.0.8
Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : Maxtor 2F020L0                   atapi Port 0 ID 0  DMA: On
CdRomPeripheral      : GIGABYTE GO-R5232C               atapi Port 1 ID 0  DMA: On
CdRomPeripheral      : CD-ROM GO-C5200E                 atapi Port 1 ID 1  DMA: Off

=== CDRom-Device-Map ===
GIGABYTE GO-R5232C         E:   CDRom0
CD-ROM GO-C5200E           F:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 39845888 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 247MB (253424kB)
Free physical memory: 76MB (78508kB)
Memory in use       : 69 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.11.2006
Video CD
4:06:36 PM        #1 Text 0 File VCDDoc.cpp, Line 1371
        VideoCD document burn settings
        ------------------------------------------
        Compilation type           : VCD
        Menu                       : Disable
        Picture in separate folder : TRUE
        Folder name                ICTURES
        Use CD-I                   : TRUE
        CD-I configuration         : CONTROLS=ALL

CURCOL=YELLOW

PSDCURCOL=RED

PSDCURSHAPE=ARROW

CENTRTRACK=2

AUTOPLAY=AUTO_ON

DUALCHAN=DUAL_ON

TIMECODE_X=64

TIMECODE_Y=100

LOTID_X=64

LOTID_Y=64

ALBUM=STANDARD
        Encoding bitrate mode      : User defined (kb/s)
       
4:06:36 PM        #2 Phase 82 File dlgbrnst.cpp, Line 1832
        Encoding video
       
4:06:36 PM        #3 Text 0 File VCDCompilationImpl.cpp, Line 514
        Using Nero Video Converter version 0.00
       
4:06:38 PM        #4 Text 0 File AVIVCDFileItem.cpp, Line 882
        Encoding C:\Program Files\eMule\Incoming\__HIGH~1.AVI to C:\DOCUME~1\TANCIE~1\LOCALS~1\Temp\NER1.tmp
        ScalingType: 0 Video: yes Audio: yes
        File size: 730150912 bytes
        Resolution: 496x368 25 Hz
        Frames: 146736
       
4:06:38 PM        #5 Text 0 File AVIVCDFileItem.cpp, Line 895
        Playing time: 5869.440000 s
        Requested rate: 225 KB/s
        iVideoRate=0
        iAudioRate=32
        Estimated size: 440208 blocks
       
6:14:09 PM        #6 Text 0 File AVIVCDFileItem.cpp, Line 924
        Encoding done
       
6:17:04 PM        #7 Text 0 File VCDFileItem.cpp, Line 434
        Actual size: 440233 blocks
       
6:17:04 PM        #8 Text 0 File VCDFileItem.cpp, Line 438
        The generated Video file is 0.999989 of the evaluated size
       
6:17:04 PM        #9 Text 0 File Isodoc.cpp, Line 6172
        Iso document burn settings
        ------------------------------------------
        Determine maximum speed : FALSE
        Simulate                : FALSE
        Write                   : TRUE
        Finalize CD             : TRUE
        Multisession            : FALSE
        Burning mode            : DAO
        Mode                    : 2 / XA
        ISO Level               : 1 (Max. of 11 = 8 + 3 char)
        Character set           : ISO 9660
        Joliet                  : TRUE
        Allow pathdepth more than 8 directories : TRUE
        Allow more than 255 characters in path  : TRUE
        Write ISO9660 ;1 file extensions        : TRUE
       
6:17:05 PM        #10 Text 0 File VCDDoc.cpp, Line 2846
        VCD options:
        -----------------------------------------------------
        Create standard compliant CD:    YES
        Encoding resolution:                     NTSC
        -----------------------------------------------------
       
6:17:05 PM        #11 Text 0 File Burncd.cpp, Line 2868
        GIGABYTE GO-R5232C
        Buffer underrun protection activated
       
6:17:06 PM        #12 Text 0 File Reader.cpp, Line 127
        Reader running
       
6:17:06 PM        #13 Text 0 File Writer.cpp, Line 122
        Writer GIGABYTE GO-R5232C        running
       
6:17:07 PM        #14 ISO9660GEN -11 File geniso.cpp, Line 3293
        First writeable address = 0 (0x00000000)
       
6:17:07 PM        #15 ISO9660GEN -11 File geniso.cpp, Line 3293
        First writeable address = 0 (0x00000000)
       
6:17:07 PM        #16 Text 0 File Burncd.cpp, Line 3153
        Turn on Disc-At-Once, using CD-R/RW media
       
6:17:41 PM        #17 Text 0 File DlgWaitCD.cpp, Line 259
        Last possible write address on media:   445499 ( 99:01.74), real:  79:59.73
        Last address to be written:             441601 ( 98:10.01)
       
6:17:41 PM        #18 Text 0 File DlgWaitCD.cpp, Line 271
        Write in overburning mode: YES (enabled: CD)
       
6:17:41 PM        #19 Text 0 File DlgWaitCD.cpp, Line 2316
        Recorder: GIGABYTE GO-R5232C;
           CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
           ATIP Data:
             Special    Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
             Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
       
6:17:41 PM        #20 Text 0 File DlgWaitCD.cpp, Line 433
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================
        Not enough free discspace.
                (Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)
       
6:17:41 PM        #21 Text 0 File ThreadedTransferInterface.cpp, Line 830
        Setup items (after recorder preparation)
         0: TRM_DATA_MODE2_2336 ()
            2 indices, index0 (150) not provided
            original disc pos #0 + 1129 (1129) = #1129/0:15.4
            relocatable, disc pos for caching/writing not required/ required, no patch infos
            -> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 1129 blocks [GIGABYTE GO-R5232C]
         1: TRM_DATA_MODE2_2336 (__HIGH~1)
            2 indices, index0 (150) not provided
            original disc pos #0 + 440323 (440323) = #440323/97:50.73
            relocatable, disc pos for caching/writing not required/not required, no patch infos
            -> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 440323 blocks [GIGABYTE GO-R5232C]
        --------------------------------------------------------------
       
6:17:42 PM        #22 Text 0 File ThreadedTransferInterface.cpp, Line 1043
        Prepare recorder [GIGABYTE GO-R5232C] for write in CUE-sheet-DAO
        DAO infos:
        ==========
         MCN: ""
         TOCType: 0x20; Session Closed, disc fixated
         Tracks 1 to 2:
           1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos             0        352800       3008208, ISRC ""
           2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos       3008208       3361008    1039000704, ISRC ""
        DAO layout:
        ===========
         __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
            -150 |  lead-in |   0 |    0x41 | 0x00
            -150 |        1 |   0 |    0x41 | 0x00
               0 |        1 |   1 |    0x41 | 0x00
            1129 |        2 |   0 |    0x41 | 0x00
            1279 |        2 |   1 |    0x41 | 0x00
          441602 | lead-out |   1 |    0x41 | 0x00
       
6:17:44 PM        #23 Phase 24 File dlgbrnst.cpp, Line 1832
        Caching of files started
       
6:17:45 PM        #24 Text 0 File Burncd.cpp, Line 4040
        Cache writing successful.
       
6:17:45 PM        #25 Phase 25 File dlgbrnst.cpp, Line 1832
        Caching of files completed
       
6:17:45 PM        #26 Phase 36 File dlgbrnst.cpp, Line 1832
        Burn process started at 40x (6,000 KB/s)
       
6:17:45 PM        #27 Text 0 File ThreadedTransferInterface.cpp, Line 2609
        Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
       
6:17:45 PM        #28 Text 0 File ThreadedTransferInterface.cpp, Line 2609
        Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1279
       
6:17:45 PM        #29 Text 0 File Mmc.cpp, Line 16480
        StartDAO : CD-Text - Off
       
6:17:45 PM        #30 Text 0 File Mmc.cpp, Line 21235
        Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
       
6:17:45 PM        #31 Text 0 File Mmc.cpp, Line 16767
        CueData, Len=48
        41 00 00 34 00 00 00 00
        41 01 00 21 00 00 00 00
        41 01 01 21 00 00 02 00
        41 02 00 21 00 00 11 04
        41 02 01 21 00 00 13 04
        41 aa 01 34 00 62 0a 02
       
6:24:18 PM        #32 Text 0 File WriterStatus.cpp, Line 116
        <GIGABYTE GO-R5232C       > start writing Lead-Out at LBA 441602 (6BD02h), lenght 0 blocks
       
6:24:18 PM        #33 Text 0 File ThreadedTransfer.cpp, Line 228
        all writers idle, stopping conversion
       
6:24:23 PM        #34 SCSI -1135 File Cdrdrv.cpp, Line 1181
        SCSI Exec, HA 1, TA 0, LUN 0
        Status:     0x04 (0x01, SCSI_ERR)
        HA-Status   0x00 (0x00, OK)
        TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
        Sense Key:  0x03 (KEY_MEDIUM_ERROR)
        Sense Code: 0x0C
        Sense Qual: 0x00
        CDB Data:   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
        Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
                    0x00 0x00 0x00 0x00 0x0C 0x00
       
6:24:23 PM        #35 CDR -1135 File ThreadedTransferInterface.cpp, Line 1867
        Write error
       
6:24:23 PM        #36 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1867
        Could not perform end of Disc-at-once
       
6:24:41 PM        #37 CDR -201 File WriterStatus.cpp, Line 167
        Invalid write state
        GIGABYTE GO-R5232C\H1 T0
       
6:24:41 PM        #38 TRANSFER -24 File WriterStatus.cpp, Line 167
        Could not perform end of Disc-at-once
       
6:24:43 PM        #39 Phase 38 File dlgbrnst.cpp, Line 1832
        Burn process failed at 40x (6,000 KB/s)
       
6:24:43 PM        #40 Text 0 File AVIVCDFileItem.cpp, Line 988
        Temporary file C:\DOCUME~1\~1\LOCALS~1\Temp\NER1.tmp deleted
       

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

很肯定的告诉你，如果烧 VCD (超烧），那片 VCD 看到最后一定是不能看了。前面还能看。

1234_4321

原帖由 zhangfei 于 6-11-2006 08:27 PM 发表
很肯定的告诉你，如果烧 VCD (超烧），那片 VCD 看到最后一定是不能看了。前面还能看。

以前我把一片有800+MB的VCD直接拿来copy disc,用刚才的seeting+刚才那中CD，都能成功。。

原帖由 1234_4321 于 7-11-2006 12:31 AM 发表

以前我把一片有800+MB的VCD直接拿来copy disc,用刚才的seeting+刚才那中CD，都能成功。。

你误会了，我的意思是（VCD)大概看到五十分钟以后就不能看了。（虽然超烧能成功。）

1234_4321

原帖由 zhangfei 于 7-11-2006 07:28 AM 发表



你误会了，我的意思是（VCD)大概看到五十分钟以后就不能看了。（虽然超烧能成功。）

以前我用的那种直接copy disc都能看到完。。

smsbiz_jenny

99分钟的CDR拿来overburn应该没有问题，你是拿nero来转换影片吗？
应该试下拿软件来转换mpeg再拿nero来burn,
burn的时候用4-16x来burn就够了，毕竟你现在burn的是大用量影片在CDR里面
可能会不够稳定