(槟城/penang）UPPER CYLINDER MAINTENANCE SERVICE

richrich

TEIK LEONG TYREPLUS PROVIDE
PROMOTION PRICE SET~
1.UPPER CYLINDER MAINTENANCE SERVICE ~
* Is a new development green energy product
*Benefit of using :
-Improved engine performance
-Reduce engine wear and tear
-Improve fuel efficiency
-Lowers carbon accumulation
2.FUEL INJECTOR CLEANER
*The fuel injector cleaner is a high power&concentrated that leans entire fuel system of car for greater power & performance.
*Speacial features:
-Cleans entire fuel system from tank to combustion chamber
-Smooths out rough idling
-Reduces exhaust pollution
-Clean injector and improves performance

So, what is decarbonising?

In simple terms, decarbonising an engine involves removal of carbon deposits from the engine, using either mechanical (physical) or chemical methods.
The procedure of mechanically cleaning out carbon deposits entails removal of the cylinder head and then, physically scraping off carbon deposits from the top of the pistons, the combustion chamber and other components (e.g. valves). Two-stroke engines of yore needed frequent decarbonising as the lubricating oil (2-T oil, in common parlance) burnt in the combustion chamber, leaving behind carbon residue.
Opening up the cylinder head of a two-stroke engine is a relatively simple procedure. This isn't the case however, with modern 4-stroke engines and their overhead camshaft(s), injectors, multiple sensors and electronics. There is a lot that can go wrong in the hands of an incompetent mechanic. Therefore, the perceived need for chemical decarbonisation.
Adding certain chemicals like alcohols and terpenes into the conventional fuel supply (petrol / diesel) appears to dissolve and remove at least a part of the carbon deposit formed in various parts of the engine, such as fuel injection systems, piston crowns & rings, combustion chambers, valves, exhaust manifolds, EGR valves, cat-cons and mufflers. The carbon is then ejected out through the exhaust. Various companies make proprietary decarbonising agents, the contents of which are usually trade secrets. A machine, such as the one pictured above, is deployed to meter the decarbonising agent along with fuel into a running engine, where it's supposed to perform its magic.

Why Decarbonise?

Most explanations about the necessity of decarbonising any engine unsurprisingly come from manufacturers of the chemical decarbonising machines! The benefits are said to be as follows:

• "Spring cleaning" of the engine from the inside, without opening it.
• Decarbonises the entire fuel system, including the O2 sensor and catalytic converter
• Restores / improves fuel efficiency.
• Maximizes vehicle performance.
• Reduces harmful emissions.
• Reduces engine noise & vibration.
• Repairs driveability problems - Eliminate engine hesitation, hard starts & rough idling.
  

"Steam cleaning" of engine internals has been put forward at times as a cheap decarbonising method, wherein water is sprayed into the air intake of a running hot engine. The steam thus generated is supposed to dislodge the deposited carbon & remove it via the exhaust. The efficacy of such a method and its positive & negative implications have been discussed at length across the world, but if improperly done, the chances of engine damage cannot be ruled out.
-FOR MORE DETAILS CALL :

1.  TEIK LEONG TYREPLUS (Batu lanchang)- ADD: 113&113A Jalan tan sri teh ewe lim (jalan batu lanchang) 11600 penang
TEL: 04-6569133/04-6583814 9am-7:30pm

2. TEIK LEONG MICHELIN (Tanjung bungah)-ADD: 502b,jalan tanjung bungah 11200 penang
TEL: 04-8991313/04-8990133 10am-7:30pm

3. TLC TYRES AUTOCARE   (Bayan lepas)       -ADD: 48,Lorong mahsuri 2 bayan lepas 11950 penang
TEL: 04-6453313 / 04-4443313  9am-7:30pm

Mepay/Barrel2u accepted here thanks /我们现在接受Mepay/Barrel2u 谢谢 .